Getting The Most From Your Water Heater

If yours is a typical family, daylight brings about a multitude of showerers and bathers preparing for the business day, child and home care day, and school day. Invariably, this entails a lot hot water hogging while various family members stand outside the bathroom doors shouting “Hurry up! I’m late!” Financial-conscious fathers mutter “What’s she doing? I could have bathed a baby elephant with that much water.” Woe to the last person in the bathroom line; he or she is the most susceptible to having to make do with a barely-tepid hasty dowsing. Showers, shampoos, baby baths, make-up applications, hair styling, even coffee-making all involve the strenuous use of the family home’s water heater. Thus, the water heater’s gallon capacity and the rapidity of its ability to heat much-needed water are of serious priority. Consider: even after family members depart for school or work, stay-out-home spouses still have laundry to do, dishwashers to fill, and floors to mop. Again, the water heater’s dependability and capacity is sorely tested. By the end of the day, when dinner dishes are washed, baby is bathed, and faces are washed, your water heater is the un-noticed hero; when you turn on the hot water faucet, you usually get what you expect and only notice this appliance when it’s not working.

What Kind Of Water Heater Is Best For Me?

That depends. If you and your partner are the only ones in the home, you will likely do well with a smaller water heater that has “instant demand” capability. This means that the heater turns cold water into hot water very rapidly. These water heaters need to be fairly small – around 20 gallons – to heat up quickly.

However, a family of four will do much better with a water heater with a capacity of 50-60 gallons to meet the morning, daytime, and evening needs of personal hygiene, cooking and cleaning. Once the hot water supply is depleted, it usually takes about an hour for the hot water to appear in your faucets.

Expense is another thing to consider when purchasing a water heater for your home. You can buy a good-quality heater for $300-700 depending upon how many gallons you require to meet the needs of your family and whether you also purchase a warranty (recommended).

Finally, your water heater uses a variety of heat sources; natural gas, electricity, even solar power. With electric heaters you don’t have be concerned about losing the pilot light as with gas heaters, nor does your hot water availability depend upon the strength of the sun. Electric water heaters are a bit more expensive; you pay extra for the assurance that barring an electrical failure, your family’s needs for baths, showers and clean dishes is assured.

The Advantages Of Hot Water Gas Heaters

There are many ways to heat water. Among the more popular heaters you will definitely find the hot water gas heaters. These heaters are able to make the water at a high concession from he regular cost. There are far more advanced technology today and many of it logically have replaced he requirements of using the hot water gas heater. However, people all over the world still cling to this method of heating water stoically. Why? What do the people gain so much out of it that they need to stop the advancement of technology?

There Are Many Types Of Other Heaters Besides The Hot Water Gas Heater

There are indeed a good number of other heaters available and there are a lot people who are happy that such appliances have at last come out, so they would be able to enjoy the benefits that the modern technology brings. The electric water heater, for example, is in high demand and people are highly satisfied with their use. However, if you look at it, from a metaphorical point of view, the old is still gold, and the annual sale of hot water gas heaters were more than the other types, thought the other types are considered are considered far superior in performance.

The newest addition of the market is the tank less water heaters which are exceptional when it comes to work. They provide hot water the moment you turn the tap on, no exceptions. This is very much appreciated by young college girls because now they can take bath anytime of the evening or morning without having to worry of switching on the geyser 20-30 minutes ahead of time.

The choice of people in general, nonetheless, stays loyal to the hot water gas heater because it is simple to use and hence, its technology is understood by all without any exceptions. Second, it is much, much cheaper than the other modern heaters, which makes the hot water gas heater an all-rounder.

There are a few disadvantages though – the hot water gas heater is a but slow when compared to the other types of heaters and it also offers you almost always the cheapest possible price for hot water. On the other hand, the moment you need it to cool down, it can do so in the minimum of time, since the gas can immediately manipulated, giving you the exact ecstatic feeling of being able to soak into the tub at the exact temperature you love.

Gas Heater For Above Ground Pool

Swimming in a pool is a joyful act but only if the temperature of the pool water remains in a narrow range i.e. 25 to 26 Celsius degrees. This temperature is not easily maintained naturally. During the swimming season the temperature of an above ground pool is in the range of 18 to 20 Celsius degrees, lower than that required for leisure swimming. In the morning, the pool water is rather cold due to loss of heat during the night. Hence we need a heater for above ground pool. Such a heater may be run by a variety of energy sources e.g. combustible gas, oil, or electricity (in which case the heater is commonly called heat pump).

Why Choose A Gas Heater For Above Ground Pool

A gas heater is the most popular source of heating the water of an above ground pool. This is because heating the pool by a gas is quicker and more efficient than by other means. Easy availability of natural gas and propane give an added advantage to gas heaters over other kinds. This makes both home and spa owners go for a gas heater for above ground pool.

Working Of A Gas Heater For Above Ground Pool

In a typical gas heater, the pool water flows through a port and gains heat from a heat exchanger. Then it comes out through a second port and falls back into the pool. In most heaters, the just-heated water is mixed with cool water resulting in maintaining a preset temperature.

Size And Sizing Of A Gas Heater For The Pool

The size of a gas heater for above ground pool depends on the size of the pool; larger heaters for bigger pools and vice versa. Also, if the difference between the pool’s temperature and that which you desire is large, you will need a larger heater even for a small pool. Further, if you can wait for your pool to get warm, a small heater may do well for an average size pool. But if you need a quick heating up of the pool, a larger size heater will be required.

Sizing refers to the ratio of input rating (the amount of fuel energy consumed), measured in Mega Joules or MJ, and energy output rating (amount of heat energy evolved), measured in Kilowatts or KW. A gas heater in the range of 60 to 100 MJ is considered a small one while a heater from 250 up to 400 MJ is a large one. The output of most heaters fall in between 25 to 100 KW.

Controls

For best results a gas heater for above ground pool should be fitted with thermostatic controls.

Gas Heater – The Heart Of The Sauna Bath

When you are having a sauna bath, I doubt you ever think of what makes it so pleasurably hot. This article will actually take you to the nitty-gritty of this type of bath. The water is normally heated by infrared heaters if you are talking about the modern sauna bath available. However, it is not uncommon to find that the water is heated by gas heaters. This is exceptionally good when you need to keep a close tab in the heat of the water.

The Versatility Of The Gas Heaters Vs The Infrared And Electric Heaters

There many times when we want to enjoy the bath without worrying about what temperature it will rise at. Of course, the modern life has brought about the automatic cut-off of heat in many instances. However, ordinarily speaking, the cut-off is usually more focused when gas heaters are used. This is because you can reduce and even put off the gas heaters at will, while the other sources of heat have more latency in diminishing the ensuing heat.

Though ‘old-fashioned’ when compared to the other techniques available, many people prefer their sauna baths to be warned up by gas heaters, even today. This is mainly because this process has absolutely no complications at all. The cost for it is much lower that its counterparts and the results are better. Those who use the gas heaters will proudly maintain that it is very much possible for them to monitor and balance the heat of the water at exactly the temperature they like. The other methods do not permit so much freedom, in spite of these being far more expensive.

In the end, it actually boils down to personal preferences. Though some people enjoy having the latest technology used for their sauna baths, it is not surprising to find that many prefer to use the old-style gas heaters to the infrared or electric heaters, because of the better control they have on it, and the excellent results it gives.

Another very important factor is the cost. The cost has always been a factor in the choice of personal necessities. Here, the cost does indeed make a vast difference, and hence makes for a good motivation factor. The bottom line however, and the deciding factor is that with the gas heater, it is extremely easy to control the heat. This is why people still have it on the ‘favorite’ list.