The topic of plumbing can be very stressful for a homeowner who isn’t familiar with plumbing repairs. Professional plumbers charge a premium amount and require a long waiting period; most plumbing issues are easy fixes that even an amateur can do. Keep reading to learn how to easily fix common plumbing problems.
You can easily fix noisy pipes. Any exposed pipes will need to be anchored. You are going to need a professional if the pipes will be located in the ceiling, walls, or the floors.
It is important that you do not pay a plumber in full, until all of the work is complete and satisfactory. Some plumbers may require a deposit, but don’t fork over all the dough until the job is completed to spec. Knowing the job was completed in a timely and high-quality manner is essential before paying for a plumber.
If you aren’t having any luck using a plunger on a clogged toilet, you may want to try pouring warm water into it from waist high. Once the water level gets low again, repeat the process.
Position a strainer over all drains to collect any particles that would otherwise go down the drain and possibly cause a stoppage. The strainer used in the kitchen will need to be cleaned frequently. Keep the bathroom drains cleaned out too.
If your home has a well for water and there are pink or orange stains in the sinks and tubs, this could be due to high iron content in your water. This is fixed by using water softener, which can be bought at a store, or you can have someone come to your home and fix it.
Be sure that the overflow holes are free of debris. Overflow holes drain water if a sink begins to overfill, so they need to be clear at all times. Periodically clear out the overflow holes when doing your other checks for things that may need repaired.
Swapping out old shower heads for energy-efficient ones can save you money on the energy bill. Hot water usage is mostly in the shower. If you spend several extra dollars putting in energy-saving shower heads, you can potentially reduce your energy bill by $100 or more annually for every shower head used in your home.
To limit toilet problems, don’t use it as a trash can. Avoid flushing pads, cotton, towels, tissues or anything that cannot dissolve easily to avoid plugging the pipes. Try to minimize the amount of toilet tissue that gets flushed, too – but don’t neglect basic hygiene!
Clean the buildup of sediment from your aerator to increase your water pressure if it’s low. Take the aerator apart and clean it with a brush and some vinegar. Then you can simply rinse off the aerator and reassemble the faucet. By removing any grit, grime and debris from the aerator, the water pressure should significantly increase.
As you can see, plumbing problems don’t have to be so difficult. If you can solve the problem yourself, you can save time waiting for a plumber, as well as saving a whole lot of money. Try applying what you’ve learned from this article next time you have a plumbing problem!
If you have desire to learn more click here.